Printing Thickener's
GUAR GUM POWDER - (RS-60)
| Property | Specification |
|---|---|
| Appearance | Creamish Powder |
| Concentration | 6% |
| Moisture | 10 To 12 |
| pH | 9.5 To 10.5 |
| Viscosity in CPS | 30000 To 32000 |
| IRM (200 Mesh PC) | Traces |
Application
GAUR GUM POWDER (RS-60) is a General Purpose
Thickener Recommended for all kind of Dyes with a Wide Range of Application e.g. Polyester, Polyamide, Wool, Silk, Cellulosic, Acetate & Triacetate. It also Gives Very Good Results in Discharge Printing with Stannous Chloride, Decrolene, Rangolite DP & Rangolite DS and in Burnout Prints.
Packaging Qty
Viscosity Tested as Per Following Methods
GUAR GUM POWDER - (RS-80)
| Property | Specification |
|---|---|
| Appearance | Creamish Powder |
| Concentration | 8% |
| Moisture | 10 To 12 |
| pH | 9.5 To 10.5 |
| Viscosity in CPS | 35000 To 40000 |
| IRM (200 Mesh PC) | Traces |
Application
Packaging Qty
Viscosity Tested as Per Following Methods
GUAR GUM POWDER - (RS-100)
| Property | Specification |
|---|---|
| Appearance | Pale Yellow Powder |
| Concentration | 10% |
| Moisture | 10 To 12 |
| pH | 10.0 To 11.0 |
| Viscosity in CPS | 35000 To 40000 |
| IRM (200 Mesh PC) | Traces |
Application
GAUR GUM POWDER (RS-100) is a General Purpose
Thickener Recommended for all kind of Dyes with a Wide Range o f Application e.g. Polyester, olyamide, Wool, Silk, Cellulosic, Acetate & Triacetate. It also Gives Very Good Results in Discharge Printing with Stannous Chloride, Decrolene, Rangolite DP & Rangolite DS and in Burnout Prints.
Packaging Qty
Viscosity Tested as Per Following Methods
CM TKP GUM-LV
| Property | Specification |
|---|---|
| Appearance | Light Brown Powder |
| Concentration | 8% |
| Moisture | 10 To 12 |
| pH | 10.0 To 11.0 |
| Viscosity in CPS | 29000 To 32000 |
| IRM (200 Mesh PC) | Traces |
Application
Packaging Qty
Viscosity Tested as Per Following Methods
CM TKP GUM – MV
| Property | Specification |
|---|---|
| Appearance | Light Brown Powder |
| Concentration | 8% |
| Moisture | 10 To 12 |
| pH | 10.0 To 11.0 |
| Viscosity in CPS | 32000 To 36000 |
| IRM (200 Mesh PC) | Traces |
Application
Packaging Qty
Viscosity Tested as Per Following Methods
CM TKP GUM-HV
| Property | Specification |
|---|---|
| Appearance | Light Brown Powder |
| Concentration | 8% |
| Moisture | 10 To 12 |
| pH | 10.0 To 11.0 |
| Viscosity in CPS | 36000 To 40000 |
| IRM (200 Mesh PC) | Traces |
Application
CM TKP GUM-HV is High Viscose Gum,
Specially Recommended for Printing of Disperse Dyes and also can be Used for Polyester, Polyester Blend Fabrics Printings.
Packaging Qty
Viscosity Tested as Per Following Methods
In Cold Water Viscosity in CPS by Spindle No. 6 at RPM 20 Brookfield Viscometer Model RVDV – I (+) with Water having
TDS of 675 To 700 at 25° C± 2° C after 2 Hrs.